Characters:

HEP-YR50DS and HEP-YR30DS laser trimmers for sensor offer smaller laser spot sizes and greater viewing capabilities than conventional trimming systems for the trimming and fine-tuning of thick-film hybrid and surface-mount devices. New optics and galvanometer subsystems open up many opportunities for the high-speed processing of today's fine-line resistor and conductor materials.

The diode-pumped laser provides virtually maintenance-free operation as compared to a conventional arc-lamp-pumped laser. The stability of the diode source makes the laser very production worthy. It is widely used to accurately adjust electronic characters of many elements such as trim carbon film, thick- film, thin-film resistor, capacitor, potentiometer, sensor, automobiles electronic module, communication module, etc.

HEP-YR50DS laser trimmers for sensor is designed based on the application of our company trimming products in sensor industry. They can be used to adjust the zero position and gain of a sensor directly, improve production efficiency and reduce production costs. They become wide application in automobiles voltage regulator, current sensor, light sensor,  humidity sensor, temperature sensor, pressure sensor, fuellevel sensor, linear potentiometer, etc.

Specifications:

Laser Beam Positioning

Type: Temperature controlled, scanning galvanometer with closed loop servo control

Trim Area: 102 mm X 102 mm

Point-to-Point Move Time: Typical moves in 6 ms with software programmable Galvo Settle time

Maximum Cutting Speed: 6000 mm/s

Resolution: 2.5 um

Repeatability: 5 um

Laser

Type: Diode-pumped, Q-switched Nd:YAG

Wavelength: 1064nm

Output Power: 50W

Maximum Repetition Rate: 50 kHz

Optics

Typical Spot Size: 20~30 um (51 mm x 51 mm trim field), 30~50 um (102 mm x 102 mm trim field)

Depth of Focus: 1.0 mm

*Actual kerf widths are material, optics and laser wavelength dependent

Alignment/Viewing

Alignment: Automatic substrate and multi-component alignment  using machine vision

Illumination: Red light emitting diode (LED) for cold light illumination

Viewing: CCTV viewing optics

Magnified view of trim area:

   Minimum Field Size (Maximum magnification): 2.5 mm x 2 mm

   Maximum Field Size (Minimum magnification): 10 mm x 8 mm

Orientation: Image identify

System Computer

Type: Industry standard PC

Monitor: Color LCD display

Interfaces: RS232, USB, parallel, IEEE-488 and Ethernet interfaces

Option: Programmable I/O card

Software

HepTrim Software: Menu/form driven user interface, interactive setup windows, standard trim database, standard data-logging routines and trim and test sensitivity curves for functional and passive trimming

Character Generation: Menu driven, compatible with trim programs, for part numbering, serial numbering and date coding. High-level compiler-based trim language and integrated edit/compile sequence, on-line help

Service Software: Menu-based, module level diagnostics and system calibration checking routines

Measurement Subsystem

Type: Two terminal, measure resistance, current, voltage, frequency, ect.

Conversion Speed: 35 us

Calibration: Automatic

Guard Offset: 1 mV

Active Guard Current: Up to 100 mA

Trim Comparator Resolution: 0.002% of range

Measurement Subsystem-DC Voltage

Type: Differential

Range: 1 V to 10 V DC (5 ranges)

Accuracy: Approx. 0.1% of reading

Resolution: 40 uV on 1V range

Calibration: Automatic

Maximum Input Voltage:10 V

Measurement Subsystem-Matrix

Type: Reed relay

Configuration: Full crosspoint where any probe can be connected to any measurement line

Number of Matrix Pins: Up to 64 points

Measurement Options: Synchro Trim allows use of HP34410A Multimeter to perform tracking trims

Remote Laser Workstation

Enables remote operation of the system via the IEEE-488 or USB interface

Handler Options

Step and repeat parts handler with prober

Type: Servo driven X-Y stages, closed loop

Stepping Field: 200 mm x 200 mm

X-Y Resolution: 5 um

X-Y Accuracy: Better than 25 um over the trim area

Prober: Programmable, windpipe driven, closed loop

Prober Travel: Programmable up to 20 mm

Prober Resolution: 3.2 um

Probe Card: Industry standard 165 mm

Cooler

Type: Deionized water

Optional Cantilever Frame

Light duty frame for customers who want simple test fixture solution

Optional Custom Parts Handlers

System accommodates third-party parts handlers and enclosures