Specifications:

Laser Beam Positioning

Type: Temperature controlled, scanning galvanometer with closed loop servo control

Trim Area: 102 mm X 102 mm

Point-to-Point Move Time: Typical moves in 6 ms with software programmable Galvo Settle time

Maximum Cutting Speed: 6000 mm/s

Resolution: 2.5 um

Repeatability: 5 um

Laser

Type: Lamp-pumped, Q-switched Nd:YAG

Wavelength: 1064 nm

Output Power: 50 W

Maximum Repetition Rate: 50 kHz

Optics

Typical Spot Size: 25~35 um (51 mm x 51 mm trim field), 35~50 um (102 mm x 102 mm trim field)

Depth of Focus: 1.2 mm

*Actual kerf widths are material, optics and laser wavelength dependent

Alignment/Viewing

Alignment: Automatic substrate and multi-component alignment using machine vision

Illumination: Red light emitting diode (LED) for cold light illumination

Viewing: CCTV viewing optics

Magnified view of trim area:

     Minimum Field Size (Maximum magnification): 2.5 mm x 2 mm

     Maximum Field Size (Minimum magnification): 10 mm x 8 mm

Orientation: Servo driven stages

System Computer

Type: Industry standard PC

Monitor: Color LCD display

Interfaces: RS232, USB, parallel, IEEE-488 and Ethernet interfaces

Option: Programmable I/O card

Software

HepTrim Software: Menu/form driven user interface, interactive setup windows, standard trim database, standard data-logging routines and trim and test sensitivity curves for functional and passive trimming

Character Generation: Menu driven, compatible with trim programs, for part numbering, serial numbering and date coding. High-level compiler-based trim language and integrated edit/compile sequence, on-line help

Service Software: Menu-based, module level diagnostics and system calibration checking routines

Measurement Subsystem-Resistance

Type: Four terminal, force current/measure voltage

Range: <1Ωto 104 MΩ(22 binary ranges)

Accuracy:

Integrator: +/- [0.15% range/reading + 0.05 %* R (MΩ) + 10mΩ]

    Successive Approximation: +/- [0.1% + Integrator accuracy]

Resolution: Approx.0.002% of range or with SW integration 0.0001%

Conversion Speed: 35 us

Calibration: Automatic

Guard Offset: 1 mV

Active Guard Current: Up to 100 mA

Trim Comparator Resolution: 0.002% of range

Measurement Subsystem-DC Voltage

Type: Differential

Range: 1 V to 10 V DC (5 ranges)

Accuracy: Approx. 0.1% of reading

Resolution: 40 uV on 1V range

Calibration: Automatic

Maximum Input Voltage:10 V

Measurement Subsystem-Matrix

Type: Reed relay

Configuration: Full crosspoint where any probe can be connected to any measurement line

Number of Matrix Pins: Up to 64 points

Measurement Options: Synchro Trim allows use of  HP34410A Multimeter to perform tracking trims

Remote Laser Workstation

Enables remote operation of the system via the IEEE-488 or USB interface

Handler Options

Step and repeat parts handler with prober

Type: Servo driven X-Y stages, closed loop

Stepping Field: 200 mm x 200 mm

X-Y Resolution: 5 um

X-Y Accuracy: Better than 25um over the trim area

Prober: Programmable, windpipe driven, closed loop

Prober Travel: Programmable up to 20 mm

Prober Resolution: 3.2 um

Probe Card: Industry standard 165 mm

Cooler

Type: Deionized water

Optional Cantilever Frame

Light duty frame for customers who want simple test fixture solution

Optional Custom Parts Handlers

System accommodates third-party parts handlers and enclosures